Your Trusted Patient Simulator Calibration Provider
Micro Precision is an ISO/IEC 17025:2017 accredited calibration provider supporting patient simulator calibration for hospital systems, biomedical research organizations, and medical device manufacturers nationwide. Every calibration is performed against NIST-traceable references, and each simulator receives a certificate of calibration documenting the parameters tested and the standards applied.
Micro Precision operates more than 50 calibration labs globally and holds ISO/IEC 17025:2017 accreditation, performing NIST-traceable patient simulator calibration for healthcare, biomedical research, and hospital quality teams that depend on accurate patient monitor verification.With a network built to support healthcare and biomedical customers across the country, Micro Precision calibrates a variety of multiparameter and vital signs simulators used to test SpO2 modules, NIBP monitors, and other point-of-care devices. Quality managers rely on our accredited process to satisfy internal quality system requirements, and lab technicians rely on our documentation to trace every result back to a NIST reference. Procurement teams work with a single accredited vendor across multiple facilities and multiple equipment categories, simplifying vendor qualification and reducing audit preparation time.
Learn more on our medical and biomedical calibration industries page.
Why Patient Simulator Calibration Matters
Uncalibrated patient simulators cannot reliably verify that patient monitors display accurate vital signs data, creating risk in direct patient care environments. ANSI/NCSL Z540.3 governs measuring and test equipment used in regulated environments, and patient simulators fall within that scope as the reference tool used to test other clinical equipment.
When a simulator drifts out of tolerance, the monitors it verifies may pass testing incorrectly, masking a real measurement error in a device used on patients. Documented, NIST-traceable calibration is reviewed during ISO certification audits and internal quality reviews, and a lapsed calibration can halt monitor verification across an entire biomedical department. Routine, accredited calibration keeps that risk contained and keeps documentation audit-ready.
Ensure Accurate Patient Simulator Calibration
Micro Precision follows a defined process for every simulator:
- Receive and inspect for physical or functional issues
- Test each parameter (SpO2, NIBP, temperature, and others) against NIST-traceable references
- Adjust any unit found outside tolerance
- Document every result
- Return the simulator with a certificate of calibration
Each step is traceable to the reference standards used, and the certificate lists tested parameters and standards applied, supporting ISO/IEC 17025:2017 audit requirements.
Standard and faster turnaround options are both available. Every simulator follows the same documented process regardless of turnaround selection, so speed does not affect accuracy or traceability.
Our Calibration Options
Micro Precision offers patient simulator calibration both in an accredited lab and on-site at hospitals, clinics, or biomedical engineering departments:
- In-lab: controlled environmental conditions, full range of reference standards
- On-site: reduced equipment downtime, no shipping risk for units in active use
Organizations with multiple locations often combine both, using in-lab for simulators used less frequently and on-site visits for units supporting continuous monitor verification.
Standard and faster turnaround options apply to both in-lab and on-site calibration, with the estimated schedule confirmed at quote. Pricing for both options can be compared side by side, and every simulator receives the same certificate of calibration regardless of option selected
Patient Simulator Types We Calibrate
Micro Precision calibrates a variety of patient simulator types used across healthcare, biomedical research, and hospital quality programs, including:
- Multiparameter patient simulators
- Vital signs simulators
- SpO2 (pulse oximetry) simulators
- NIBP (non-invasive blood pressure) simulators
- Invasive blood pressure (IBP) simulators
- Temperature simulators
- Respiration simulators
- Fetal monitor simulators
If a specific patient simulator model is not listed above, it is likely still supported. Contact Micro Precision to confirm calibration availability for models from manufacturers such as Fluke Biomedical, Netech, Metron, and Datrend.
Calibration Service Levels Offered
Micro Precision offers multiple service levels for patient simulator calibration, allowing quality managers and procurement officers to select the level of documentation and accreditation that matches their compliance requirements.
| Type of Service | Traceable | Traceable with Data | Accredited (ISO:IEC 17025:2017, Z540.3) |
|---|---|---|---|
| Calibrated to manufacturers specifications traceable to SI Units | |||
| ISO 9000 Compliant | |||
| Calibration certificates, data, maintained on secure web based tool (CDM) | |||
| Detailed calibration certificates and calibration stickers | |||
| Instrument adjustment (if found out of tolerance) | |||
| ANSI/NCSL Z540-1 compliant | |||
| Calibration Data | |||
| Logo from Accreditation body, Expanded Measurement Uncertainty | |||
| ANSI/NCSL Z540.3 compliant |
Patient Simulator Calibration Services
Micro Precision provides ISO/IEC 17025:2017 accredited, NIST-traceable patient simulator calibration for hospital systems, biomedical research organizations, and healthcare quality teams nationwide. With more than 50 calibration labs, in-lab and on-site options, and documented calibration for a variety of multiparameter and vital signs simulators, Micro Precision gives quality managers, lab technicians, procurement officers, and compliance officers a single accredited partner for patient monitor verification equipment. Request a calibration quote to schedule service today.
Please complete our quick Patient Simulator calibration & repair service request form, and a Micro Precision representative will reach out to you same-day during office hours, or within one business day after office hours. (Mon – Friday 8AM – 4PM PST)
Patient Simulator Calibration Services
If you have any inquiries, or simply wish to connect with us, we'd love to hear from you! Please don't hesitate to reach out to us.
"*" indicates required fields
Frequently Asked Questions
Patient simulator calibration verifies that a multiparameter or vital signs simulator generates accurate SpO2, NIBP, temperature, and other physiological waveforms used to test patient monitors. Accurate calibration confirms the simulator’s output is NIST-traceable, giving healthcare and biomedical teams confidence that monitor verification results are reliable and audit-ready.
Most healthcare and biomedical organizations calibrate patient simulators on an annual basis, though frequency depends on usage intensity, manufacturer recommendations, and internal quality procedures. ANSI/NCSL Z540.3 supports risk-based calibration intervals, and Micro Precision works with quality teams to confirm an interval that satisfies accreditation and audit requirements.
Patient simulator calibration follows ANSI/NCSL Z540.3 requirements for measuring and test equipment, with results reported against NIST-traceable references. Micro Precision performs this work under ISO/IEC 17025:2017 accreditation, the internationally recognized standard for calibration laboratory competence, so certificates of calibration meet the documentation expectations of quality and compliance auditors.
Patient simulators can be calibrated either in an accredited lab or on-site at a hospital, clinic, or biomedical department, depending on equipment sensitivity and facility preference. Micro Precision offers both options, with in-lab calibration providing controlled environmental conditions and on-site calibration reducing simulator downtime and shipping risk.
Patient simulator calibration checks a variety of parameters, including SpO2, NIBP, temperature, respiration, and invasive blood pressure outputs, depending on the simulator model. Multiparameter simulators are verified across each supported channel so the certificate of calibration documents every parameter the device generates for patient monitor testing.
Patient simulator calibration turnaround varies by service level and lab workload, with standard and faster options available depending on scheduling needs. Micro Precision confirms an estimated turnaround at the time of quote so quality and procurement teams can plan monitor verification schedules without unplanned equipment downtime.
Patient simulator calibration cost depends on the simulator model, number of parameters tested, service level selected, and whether calibration is performed in-lab or on-site. Micro Precision provides a quote based on these factors, giving procurement officers a transparent basis for comparing calibration options before committing to service.